Samsung Plasma TV User Manual page 7

When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic
settings. To turn on the TV, press the
Setup is available only when the input source is set to TV.
✎
To return to the previous step in the input source sequence, select Previous.
✎
Before turning on the TV, make sure you have connected the TV to an antenna or cable connection
✎
(p. 6).
To start the Setup select Start.
✎
If you want to configure a wired network connection during Setup, make sure you've connected
✎
a LAN cable to your TV. See pages 17 for instructions. If you want to configure a wireless network
connection during Setup, make sure your wireless modem or router is on and working.
1
Menu Language:
Select a Language.
2
Use Mode: Select
the Home Use Mode.
3
Network Settings:
Configure network
settings
To configure
✎
later, select Skip.
You can set up
the network
connection later
using the on-
screen Network
menu.
Setup
button.
P
After you press the button, the Start screen appears. Select Next
P
to continue. The Menu Language screen appears. Select the menu
language you want using your remote, and then select Next. The TV will
display on-screen menus using the language you select beginning with
the next step in the Setup process. (Not available in some locations)
On the Use Mode screen, select the Home Use mode using your
remote, and then select Next. The Network Settings screen appears.
Store Demo mode is for retail environments only. If you select
✎
Store Demo, some functions will not work, and the TV will reset
all functions to their factory default every 15 minutes. For more
information about Store Demo, go to the end of this section.
To continue configuring the network settings, select Next using your
remote. If you do not know your network set up information or want
to set to it later, select Skip. For more detailed information, refer to
"Setting up the Wired or Wireless Network" in the e-Manual for set up
requirements and instructions, and the Network Connection section of
this manual (p. 16). You can set up the network connection later using
the Network menu.
English - 7