Description
—Remote Control—
POWER STANDBY/ON button
SLEEP button
OPEN/CLOSE button
DISC SKIP button
REPEAT button
TUNER button
TAPE PLAY button
SOUND MODE button
VOLUME button
MENU button
MUTE button
Number(0~9) buttons
TIMER/CLOCK button
TIMER ON/OFF button
EZ VIEW, NTSC/PAL button
7
ZOOM button
DIMMER/DEMO button
SLOW,MONO/ST button
SUB TITLE button
DECK 1/2 button
AUX button
Play/Pause button
Stop button
Tuning Preset/CD Skip button
TUNER MEMORY,P.SCAN button
TUNING button
INFO button
RETURN button
Direction/Enter button
AUDIO button
REPEAT A<–> B button
STEP button
DIGEST button
SLIDE MODE button
CANCEL button
LOGO button
Insert Remote Batteries
1
2
Remove the battery
Insert two 1.5V AAA
cover on the back of
batteries, paying
the remote by
attention to the correct
pressing down and
polarities (+ and –).
sliding the cover in
the direction of the
arrow.
Follow these precautions to avoid leaking or cracking cells:
Caution
•
Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
•
Use the correct type of batteries.Batteries that look similar may differ in voltage.
•
Always replace both batteries at the same time.
•
Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
3
Replace the battery
cover.
To open the remote control cover, push the
top of the cover, then slide downward.
8