Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Primo Water 900139
Summary of Contents for Primo Water 900139
-
Page 1: User Manual
Model # 900139: Page 1 USER MANUAL Bottled Water Dispenser Model # 900139 TO REDUCE THE RISK OF INJURY AND PROPERTY DAMAGE, USER MUST READ THIS MANUAL BEFORE ASSEMBLING, INSTALLING & OPERATING DISPENSER. SAVE FOR FUTURE USE PN O-010A © 2008 Primo Water Corporation... -
Page 2: Safety Precautions
Model # 900139: Page 2 SAFETY PRECAUTIONS To reduce risk of injury and property damage, user must read this entire manual before assembling, installing & operating dispenser. Failure to execute the instructions in this manual can cause personal injury or property damage. -
Page 3: Table Of Contents
Model # 900139: Page 3 TABLE OF CONTENTS Safety Precautions …………………………………………… Key Information for Future Use ……………………………. Specifications ………………………………………………… Parts & Features …………………………………………….. Assembly ……………………………………………………… Installation ……………………………………………………. Operation …………………………………………………….. Proper Care & Cleaning ……………………………………. Troubleshooting ……………………………………………… 11 Limited Warranty ……………………………………………… 12... -
Page 4: Specifications
Model # 900139: Page 4 SPECIFICATIONS Power Supply 4.5 AMP Refrigerant Type R-134A Cold Water Power 125 Watts Cold Capacity / Hour 1.0 Gallons Cold Temp Range 39qF – 59qF Hot Water Power 375 Watts Hot Capacity / Hour 1.0 Gallons Hot Temp Range 149qF –... -
Page 5: Assembly
Model # 900139: Page 5 ASSEMBLY Keep plastic bags away from children. Remove dispenser from packaging. Unpack drip tray and insert into dispenser. Properly dispose all of packaging. -
Page 6: Installation
Model # 900139: Page 6 INSTALLATION To prevent accidental tip hazard, dispenser must be securely anchored to wall as shown. Place dispenser upright. Locate dispenser on a hard and level surface in a cool shaded location near a grounded wall outlet. -
Page 7: Operation
Model # 900139: Page 7 OPERATION This unit is intended for water dispensing only. Do NOT use other liquids. Do NOT use for other purposes. This dispenser has been designed to use water bottles with 3 & 5 gallon capacity. - Page 8 Model # 900139: Page 8 Dispensing Hot Water This unit dispenses water at temperatures that can cause severe burns. Avoid direct contact with hot water. Keep children and pets away from unit while dispensing. Never allow children to dispense hot water without proper and direct supervision.
-
Page 9: Proper Care & Cleaning
Model # 900139: Page 9 PROPER CARE & CLEANING General Cleaning Perform: As needed Time Required: 5 minutes. Note: Do NOT use abrasive materials or chemical cleaners. Clean cabinet surfaces with a soft cloth and warm soapy water, then rinse. - Page 10 Model # 900139: Page 10 Remove plastic baffle from inside reservoir. Clean probe assembly and baffle with a soft cloth using a mixture of one gallon tap water and 1 tablespoons unscented household bleach, then rinse. 10. Wipe inside of reservoir and area around both taps with a soft cloth using a mixture of one gallon tap water and 1 tablespoons unscented household bleach.
-
Page 11: Troubleshooting
Model # 900139: Page 11 TROUBLESHOOTING Dispenser does not operate. Make sure the power cord is properly connected to a working outlet. Water is leaking. Bottle may have a leak. Remove bottle and replace with new bottle. If leak remains, remove bottle and call 866-429-7566 for assistance. -
Page 12: Limited Warranty
Model # 900139: Page 12 LIMITED WARRANTY Primo Water Corporation, (“Vendor”) warrants to the original purchaser o f this dispenser, and to no other person, that if this dispenser is assembled and operated in accordance with the printed instructions accompanying it, then for a period of two (2) years from the date of purchase, all parts in such dispenser shall be free from defects in material and workmanship.