DEMO Function / DIMMER Function
DEMO Function
You can view the various functions available on your system.
Press DEMO button.
•
The various functions available are listed in turn on the display.
•
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate sections.
DIMMER Function
You can adjust the brightness of the display on the main unit so it won't
interfere with your movie viewing.
Press DIMMER button.
•
Each time the button is press, the brightness changes as follows:
DIMMER ON(Dim) © DIMMER OFF(Bright).
Note
Press any buttons to cancel DEMO function.
When you turn off the main unit, DEMO function will be auto start
after 10 senconds. if you want to cancel this DEMO function, press
DEMO button again.
59
Connecting Headphones
You can connect a set of headphones to your micro component system so that you can listen
to music or radio programmers without disturbing other people in the room. The headphones
must have a 3.5ø jack or an appropriate adapter.
Connect the headphones
to the headphones jack
on the front panel.
•
The loudspeakers are no longer used to
output the sound.
Note
•
Prolonged use of headphones at a high volume may damage your hearing.
•
When you use the headphones, the HDMI Audio will auto swicth to Off mode.
ENG
60