Checking the Remaining
Time
DVD
CD
1
1
Press the REMAIN
Press the REMAIN
button.
button.
If you press the
•
For checking the remaining time of a
REMAIN button, the
title or chapter being played.
remaining time is
Each time the REMAIN button
displayed.
is pressed , the time is
displayed as below:
To cancel this function,
press the REMAIN
button again.
TITLE REMAIN TIME
CHAPTER REMAIN TIME
ELAPSED TIME
21
MP3
Disc Playback
1
Press OPEN/CLOSE button to open the
disc tray.
2
Load a disc.
•
Place a disc gently into the tray with the disc's label facing up.
3
Press OPEN/CLOSE button to close the disc
tray.
•
For mixed discs, the play order is as below:MP3/WMA © DIVX © JPEG.
Note
•
Depending on the content of the disc, the initial screen may appear different.
•
Depending on the recording mode, some MP3-CDs cannot be played.
•
For CD discs, you can press the numeric buttons to select the track, when you
press the numeric buttons after 3 seconds, the playback starts automatically.
•
Table of contents of a MP3-CD varies depending on the MP3 track format recorded
on the disc.
•
DTS Audio disc is not supported.
•
DVD Audio disc is not supported.
To stop playback, press STOP button during playback.
•
If pressed once, the stop position will be stored in memory. If PLAY (
is pressed, playback resumes from the stop position. (This function works only with
DVDs.)
•
If pressed twice, "STOP" is displayed, and if PLAY (
playback starts from the beginning.
To temporarily pause playback, press PAUSE button
during playback.
•
To resume playback, press PLAY(
ENG
) button
) button is pressed,
) button again.
22