Faucet comes complete with factory installed handles.
V=Vandal-Resistant, H=Standard
51mm
(2)
GENERAL DESCRIPTION:
Durable cast brass construction. Amarilis 1/4 turn washerless
ceramic disc valve cartridges. One-half inch male inlet shanks
with brass coupling nuts and shank nuts. Vandal-resistant
faucets feature vandal-resistant aerators and index buttons on
factory-installed handles. 1.5 gpm/5.7L/min. maximum flow
rate.
SUGGESTED SPECIFICATION:
4" centerset lavatory faucet shall be cast brass construction with all brass shank nuts and coupling nuts. Shall feature
water-conserving 1.5 gpm/5.7L/min. pressure compensating aerator. Shall also feature 1/4 turn washerless ceramic disc valve
cartridges. Fitting shall be American Standard Model # ______.____.002.
© 2008 AS America Inc.
.172 Handle
127mm
(5)
235mm
(9-1/4)
135mm
(5-5/16)
35mm
(1-3/8) MAX.
TWO-HANDLE CENTERSET LAVATORY FAUCET
WITH GOOSENECK SPOUT & FACTORY INSTALLED HANDLES
MODEL NUMBER:
7400.172H Centerset Lavatory Faucet
Rigid gooseneck spout. 1.5 gpm pressure compensating
aerator. Brass wrist blade handles. Less drain.
7400.172V Centerset Lavatory Faucet
Rigid gooseneck spout. 1.5 gpm pressure compensating
aerator. Vandal-resistant brass wrist blade handles.
Vandal-resistant aerator. Less drain.
7401.172H Centerset Lavatory Faucet
Rigid gooseneck spout. 1.5 gpm pressure compensating
aerator. Brass wrist blade handles. Pop-up drain.
7402.172H Centerset Lavatory Faucet
Rigid gooseneck spout. 1.5 gpm pressure compensating
aerator. Brass wrist blade handles. Grid drain.
7402.172V Centerset Lavatory Faucet
Rigid gooseneck spout. 1.5 gpm pressure compensating
aerator. Vandal-resistant Brass wrist blade handles.
Vandal-resistant aerator. Grid drain.
140mm
(5-1/2)
51mm
(2)
102mm
(4)
PRODUCT FEATURES:
Pressure Compensating Aerator: Provides a constant water
flow of 1.5 gpm throughout the pressure range.
Solid Brass Construction:
applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridges:
drip-free performance.
Low Lead:
Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Factory Installed Handles:
L43
HERITAGE
22mm
(7/8) DIA.
32mm
(1-1/4)DIA.
MOUNTING
HOLES
FOR GROUND JOINT
OR 1/2" O.D. SLIP
CONNECTION
Durable - Excellent in high use
Assures a lifetime of
Simplifies installation.