American Standard BERWICK 7430.15 Series Installation Instructions

BERWICK ™
VESSEL LAVATORY FITTING
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
Recommended Tools
Adjustable Wrench
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
1
INSTALL LAVATORY FAUCET
Turn off hot and cold water
CAUTION
supplies before beginning.
Seat SEAL (1) into under side of ESCUTCHEON RING (2).
Seat ESCUTCHEON RING (2) with collar facing up into groove
in faucet base.
Feed FAUCET SUPPLIES (3) and MOUNTING SHANK (4) through
ESCUTCHEON RING (2) and hole in mounting surface.
From below, install SUPPORT PLATE (7) GASKET (5) and MOUNTING
NUT (6) onto SHANK (4). Secure Faucet with MOUNTING NUT (6).
Before final tightening, adjust Faucet so that it is centered. Tighten
MOUNTING NUT (7) to complete mounting.
Note: For thick deck installations, the SUPPORT PLATE (7) can be omitted.
Installation
Instructions
Plumbers' Putty or Caulking
MOUNTING SURFACE
7430.15X
Certified to comply with ANSI A112.18.1M
Regular Screwdriver
Phillips Screwdriver
2
1
4
7
5
6
3
M 9 6 8 6 4 2
Channel Locks
GROOVE
(FAUCET BASE)
COLLAR