Bose SoundTouch SA-4 Manual page 12

Setting up the System
6.
When prompted by the app, plug the small end of the USB cable into the
SETUP A connector on the SoundTouch
7. Plug the larger end of the USB cable into a USB port on your computer.
When the SoundTouch
on the rear panel of the SoundTouch
The app instructs you to enter your network credentials.
8.
When prompted to remove the USB cable, disconnect the USB cable from
the SoundTouch
Note: Leave the wireless adapter connected to the SA-4 amplifier,
and the amplifier connected to AC (mains) power.
9. Follow the instructions on your computer to complete setup, including
creating a SoundTouch
in to music services, exploring music, and personalizing your presets.
Note: During this process, you will be prompted to install the provided
batteries into the SoundTouch
10. When finished, disconnect the SA-4 amplifier from AC (mains) power and
prepare to connect the speakers.
If the amplifier is not in its permanent location, install the SA-4 amplifier and
the SoundTouch
(mains) power, it reconnects to your network.
12 - English
app detects your system, the Wi-Fi
™
wireless adapter and from the computer.
™
account, locating your music library, signing
™
wireless adapter. When you reconnect the system to AC
™
wireless adapter.
™
SoundTouch
adapter SETUP A connector
wireless adapter lights solid amber.
™
controller.
™
wireless
™
status indicator
®