Hardware Overview; Led Indicators - Axis M1143–L User Manual

AXIS M1143–L

Hardware Overview

• Connecting to an AXIS Video Hosting System service. See
1 second until the Status LED flashes green.
• Connecting to AXIS Internet Dynamic DNS Service. See
about 3 seconds.
• Resetting the product to factory default settings. See
I/O terminal connector - Use in applications for e.g. motion detection, event triggering, time lapse recording and alarm notifications.
In addition to an auxiliary power and a GND pin, the I/O terminal connector provides the interface to:
• Digital output – For connecting external devices such as relays and LEDs. Connected devices can be activated by
the VAPIX® Application Programming Interface, output buttons on the Live View page or by an Action Rule. The
output will show as active (shown under System Options > Ports & Devices) if the alarm device is activated.
Digital input – An alarm input for connecting devices that can toggle between an open and closed circuit, for
•
example: PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and
the input becomes active (shown under System Options > Ports & Devices).

LED Indicators

LED Color
Network Green
Amber
Unlit
Status Green
Amber
Red
Power
Green
Amber
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options >
Ports & Devices > LED. See the online help for more information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .
Indication
Steady for connection to a 100 MBit/s network. Flashes for network activity.
Steady for connection to a 10 MBit/s network. Flashes for network activity.
No network connection.
Steady green for normal operation.
Steady during startup and when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
page 37
. To connect, press and hold the button for about
page 38
. To connect, press and hold the button for
page 44
.
5