Axis M1143–L User Manual page 9

AXIS M1143–L
Accessing the Product
Note
These controls are available if digital PTZ is enabled in the selected view area, see
Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the
mouse pointer.
Click the Center mode button and click in the image to center the camera view on that position. The center mode
button could also be used to zoom in on a specific area. Click in the image and drag to draw a rectangle surrounding
the area to be magnified. To zoom out, rotate the mouse wheel.
Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the
camera view to that position.
Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position.
The PTZ controls can be disabled under PTZ > Advanced > Controls, see
Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls.
User-defined buttons can also appear in the Control panel. See
Select a PTZ preset position to steer the camera view to the saved position. See
on page 22
.
View Area on page 17
Controls on page 23
9
.
Controls on page 23
.
Preset Positions
.