Dst (Daylight Saving Time) Setting; Adjustable Snooze; Time Setting; Date Setting - La Crosse Technology WT-5721 Instruction Manual

D.

DST (DAYLIGHT SAVING TIME) SETTING

Note: The DST default is "On", meaning that the WWVB will automatically change the time
according to Daylight Saving Time in the spring and fall. For areas that do not recognize
DST changes (Arizona and parts of Indiana) turn the DST "OFF".
1. Hold down the "SET" button for 1 second (the selected time zone will flash); press and
release the "SET" button once more until "On" flashes in the lower left and "DST"
flashes in the upper right.
2. Press and release the "+" button to turn the DST off, as will be indicated by the display
of "OFF" in the time LCD.
3. Press and release the "SET" button to confirm the DST setting, and to advance to
select the length of the snooze.
E. ADJUSTABLE SNOOZE TIME
Note: The snooze length can be adjusted from 1 minute to 59 minutes. This duration refers
to the length of time the alarm will be disabled when the "SNOOZE" bar is pressed. If set to
"0", activating the snooze will turn off the alarm for 24 hours.
1. Hold down the "SET" button for 1 second (the selected time zone will flash), press and
release the "SET" button 2 more times, until "Sno" appears in the lower left and
duration (":10" default) flashes in the time LCD.
2. Press and release the "+" button to advance the snooze time from 0 (off ) to 59
minutes.
3. Press and release the "SET" button to confirm the snooze setting, and to advance to
manually set the time.
F.

TIME SETTING

Note: When the WWVB signal is found, that time will over-ride the manually set time.
1. Hold down the "SET" button for 1 second (the selected time zone will flash), press and
release the "SET" button 3 more times, until the hour flashes in the time LCD.
2. Press and release the "+" button to select the hour. Note: when setting the hour, "PM"
will appear to the left of the hour display, if it is AM nothing will be displayed.
3. Press and release the "SET" button to confirm the hour setting, and to shift to select
the minutes.
4. Press and release the "+" button to select the minutes.
5. Press and release the "SET" button to confirm the time setting, and to advance to
manually set the date.
G.

DATE SETTING

Note: When the WWVB signal is found, that date will over-ride the manually set date.
1. Hold down the "SET" button for 1 second (the selected time zone will flash), press and
release the "SET" button 5 more times, until the year flashes in the date LCD.
2. Press and release the "+" button to select the year.
3. Press and release the "SET" button to confirm the year, and to set the month.
4. The month will flash. Press and release the "+" button to select the appropriate
month.
5. Press and release the "SET" button to confirm the month, and to set the date.
6. The date will flash. Press and release the "+" button to select the appropriate date.
7. Press and release the "SET" button to confirm the date, and to set the weekday.
8. The weekday will flash. Press and release the "+" button to select the appropriate
weekday.
7