Dst (Daylight Saving Time) Setting; Adjustable Snooze - La Crosse Technology WT-5720TWC Instruction Manual

5. From –5h to –8h a US map with the highlighted time zone will also be
displayed to the right of the time display.
-4h
-5h
-6h
-7h
-8h
-9h
-10h
-11h, -12h
0h
-1h, -2h, -3h
6. Press and release the "SET" button to confirm the time zone setting and to
advance to DST (Daylight saving time) setting.
D. DST (Daylight Saving Time) Setting
Note: The DST default is "On", meaning that the WWVB will automatically change
the time according to Daylight Saving Time in the spring and fall. For areas that do
not recognize DST changes (Arizona and parts of Indiana) turn the DST "OFF".
1. Hold down the "SET" button for 1 second.
2. The selected time zone will flash.
3. Press and release the "SET" button once more until "On" flashes in the
lower right and "DST" flashes in the upper right.
4. Press and release the "+" button to turn the DST off, as will be indicated by
the display of "OFF" in the time LCD.
5. Press and release the "SET" button to confirm the DST setting and to
advance to select the length of the snooze.
E. Adjustable Snooze Time
Note: The snooze length can be adjusted from 1 minute to 59 minutes. This duration
refers to the length of time the alarm will be disabled when the "SNOOZE" bar is
pressed. If set to "0", activating the snooze will turn off the alarm for 24 hours.
1. Hold down the "SET" button for 1 second.
2. The selected time zone will flash.
3. Press and release the "SET" button 2 times until "Sno" appears in the lower
right and duration (":10" default) flashes in the time LCD.
4. Press and release the "+" button to advance the snooze time from 0 (off ) to
59 minutes.
Atlantic Time
Eastern Time (default setting)
Central Time
Mountain Time
Pacific Time
Alaskan Time
Hawaiian Time
Next two time zones West of HAW
Greenwich Mean Time
Three time zones West of GMT
7