Making An Outgoing Call; Call Transfer - Jensen VM9214BT Operating Instructions Manual

Volume Control
To increase or decrease the volume level, turn the rotary encoder (7) on the
front panel.
Microphone Mute
To mute the microphone, touch the
microphone functionality.

Making an Outgoing Call

NOTE: Touch the
automatically dial the last call received.
1. Touch the
2. Use the 0-9, *, and # buttons to input the phone number.
• Touch the CLEAR button to clear the last digit.
• Touch the
3. After entering the phone number, touch the
direct dial screen will close once your call is connected.
4. To end the conversation, touch the

Call Transfer

While talking, to transfer audio from the head unit back to the mobile phone,
touch the button (6). The TFT will display "Transfer". You can only transfer a
call after it has been answered.
Menu List
The menu list appears on the left side of the screen and can be accessed from
other modes by touching the MENU button on the right side of the screen.
button from the main Bluetooth screen to
button to open the direct dial screen.
1 2
4 5
7 8
0
*
button to clear the entire number and start over.
button (10). Touch again to resume
3 Exit
6 Clear
9
#
button to dial the call. The
button.
46
VM9214BT