Impex SA GEAR SAG-71 Owner's Manual page 11

STEP 5 (See Diagram 5)
A.) Attach the Backrest Board (#13) to the Backrest Support Frame (#6). Secure it
with two M8 x 5/8" Allen Bolts (#25) and two Ø 5/8" Washers (#35).
B.) Attach two Arm Pads (#14) to Left & Right Arm Support (#4 & #5). Secure each
Arm Pad with two M8 x 2 ½" Allen Bolts (#26) and two Ø 5/8" Washers (#35).
C.) Attach four Upright Base Covers (#18) to the base of Left & Right Upright Beam
(#2 & #3). Secure each Cover with one ST3.5 Self Taping Screw (#21).
D.) Use twenty-six Bolt Cover Caps (#20) to cover all Bolts installed.
10
DIAGRAM 5