Wheel And Deck Zerks; Front Wheel Mount; Front Wheel Bearings; Deck Spindle - Husqvarna P-ZT26 CE Operator's Manual

Wheel and Deck Zerks

Use only good quality bearing grease.
Grease from well-known brand names (petrochemical
companies, etc.) usually maintains a good quality.

Front Wheel Mount

Remove dust cap to expose zerk. Lubricate with a
grease gun until the grease is forced out around the
top washer.

Front Wheel Bearings

Lubricate 3-4 strokes with a grease gun on each set of
wheel bearings.

Deck Spindle

Lower the cutting deck completely.
If a grease gun without rubber hose is used, the foot
plate must be removed.
Lubricate with a grease gun, 2-3 strokes per spindle.
LUBRICATION
Lubricating front wheels
Deck spindle
8065-032
8058-131
47 47