Heath Zenith SL-5408 Owner's Manual

Heath Zenith SL-5408 Owner's Manual

Heath zenith owner's manual motion sensor light control sl-5408
Hide thumbs Also See for SL-5408:
Table of Contents

Advertisement

Available languages

Available languages

Motion Sensor Light
Control
As an ENERGY STAR
has determined that this product meets the
ENERGY STAR
ciency. This product is ENERGY STAR
pliant when used with 120 Watt bulbs.
Model SL-5408
Features
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Photocell keeps the lighting off during daylight hours.
This package includes:
Lamp Holders
Cover
Plate
Sensor
Light Control
Requirements
• The Light Control requires 120-volts AC.
• If you want to use Manual Mode, the control must be
wired through a switch.
• Some codes require installation by a qualified
electrician.
• This product is intended for use with a junction box
marked for use in wet locations.
• The backplate has knockouts so the sensor can be
mounted on most junction boxes.
• In some applications a universal adaptor plate may be
needed. Adaptors are available at home centers and
electrical supply stores.
© 2004 DESA Specialty Products™
®
Partner, Heath
®
/Zenith
®
guidelines for energy effi-
®
com-
4 Mounting
Screws (2 sizes)
Gasket
2 Wire
Connectors
OPERATION
Mode:
On-Time:
Test
5 Sec
Auto
1, 5, 10 min.
Manual
Until Dawn*
* resets to Auto Mode at dawn.
Note: When first turned on wait about 1
the circuitry to calibrate.
Put the ON-TIME switch on the bottom
of the sensor in the TEST position.
Put the ON-TIME switch in the 1, 5, or
10 minute position.
MANUAL MODE
Manual mode only works at night
because daylight returns the sensor
to AUTO.
Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.
Manual mode works only with the ON-
TIME switch in the 1, 5, or 10 position.
Mode Switching Summary
TEST
AUTO
MANUAL MODE
* If you get confused while switching modes, turn the
power off for one minute, then back on. After the
calibration time the control will be in the AUTO mode.
Works:
Day
x
1
/
minutes for
2
TEST
ON-TIME
10 5 1 TEST
AUTO
ON-TIME
10 5 1 TEST
1 Second OFF
then...
... back on.
Move ON-TIME Switch to
1, 5, or 10 minutes
Flip light switch off
for one second then
back on*
595-5292-18
Night
x
x
x

Advertisement

Table of Contents
loading

Summary of Contents for Heath Zenith SL-5408

  • Page 1 ENERGY STAR guidelines for energy effi- ciency. This product is ENERGY STAR pliant when used with 120 Watt bulbs. Model SL-5408 Features • Turns on lighting when motion is detected. • Automatically turns lighting off. • Photocell keeps the lighting off during daylight hours.
  • Page 2: Installation

    INSTALLATION For easy installation, select an existing light operated by a wall switch for replacement. For best performance, mount the fixture about 8 feet (2.4 m) above the ground. ❒ Drill the holes needed to mount the backplate to the junction box. 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 Eave Mount...
  • Page 3: Test And Adjustment

    TEST AND ADJUSTMENT ❒ Turn on the circuit breaker and light switch. ❒ Turn the SENSITIVITY (SENS) control to the mid position and the ON-TIME control to the TEST position. NOTE: Sensor has a 1 minute warm up period before it will detect motion. When first turned on, wait 1 minutes.
  • Page 4: Troubleshooting Guide

    TROUBLESHOOTING GUIDE SYMPTOM POSSIBLE CAUSE Lights will not come 1. Light switch is turned off. 2. Flood burned out. 3. Fuse is blown or circuit breaker is turned off. 4. Daylight turn-off is in effect (re- check after dark) . 5.
  • Page 5 ENERGY STAR ® cuando se usa con focos de 120 vatios. Modelo SL-5408 Características • Prende la luz cuando detecta movimiento. • Apaga la luz automáticamente. • La fotocélula mantiene la luz apagada durante el día.
  • Page 6 INSTALACION Para una fácil instalación escoja una luz con un interruptor de pared. Para un mejor funcionamiento, instale el aparato a casi 2,4 m del suelo. ❒ Perfore los agujeros que se necesiten para montar la placa de atrás a la caja de empalmes. 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 Montaje en pared...
  • Page 7: Prueba Y Ajuste

    PRUEBA Y AJUSTE ❒ Prenda el cortacircuitos y el interruptor de luz. ❒ Gire el control de sensibilidad (SENS) a la mid, y el control de tiempo (ON-TIME) a la posición de prueba (TEST). NOTA: El detector tiene un período de cerca de 1 minutos de calentamiento antes de detectar movimiento.
  • Page 8: Guia De Investigacion De Averias

    GUIA DE INVESTIGACION DE AVERIAS SINTOMA POSIBLE CAUSA 1. El interruptor de luz está enciende. apagado. 2. El faro está flojo o fundido. 3. El fusible está quemado o el cortacircuitos está apagado. 4. La desconexión de luz del día está...
  • Page 9 . Ce produit est conforme à ENERGY STAR ® lorsqu’il est utilisé avec des ampoules de 120 watts. Modèle SL-5408 Caractéristiques • Allume l’éclairage lorsqu’un mouvement est détecté. • Éteint automatiquement l’éclairage. • Photocellule qui maintient l’éclairage éteint pendant la période de lumière du jour.
  • Page 10 INSTALLATION Pour faciliter l’installation, choisir un appareil d’éclairage devant être remplacé et qui est déjà commandé par un interrupteur. Pour assurer un rendement maximal, monter l’appareil d’éclairage environ 2,4 mètres au-dessus du sol. ❒ Percez les trous nécessaires au montage de la plaque arrière à...
  • Page 11: Essais Et Réglages

    ESSAIS ET RÉGLAGES ❒ Mettre en circuit le disjoncteur et l’interrupteur d’éclairage. ❒ Tourner la commande de sensibilité (SENS) à la position intermédiaire et la commande de temps en circuit (ON-TIME) à TEST. NOTE: Le capteur doit se réchauffer 1 de pouvoir détecter le mouvement.
  • Page 12: Guide De Dépannage

    GUIDE DE DÉPANNAGE SYMPTÔME CAUSE POSSIBLE L’éclairage 1. L’interrupteur d’éclairage est hors s’allume pas. tension. 2. Le projecteur est dévissé ou brûlé. 3. Le fusible a sauté ou le disjoncteur a été déclenché. 4. Le dispositif de coupure pendant le jour fonctionne. (Vérifiez à nouveau à...

Table of Contents