Serial Port Configuration; Power Failure - American Megatrends MB960 User Manual

BIOS SETUP
EHCI Hand-off
Enabled/Disabled. This is a workaround for OSes without EHCI hand-off
support. The EHCI ownership change should be claimed by EHCI driver.
USB Transfer time-out
The time-out value for Control, Bulk, and Interrupt transfers.
Device reset tine-out
USB mass Storage device start Unit command time-out.
Device power-up delay
Maximum time the device will take before it properly reports itself to the
Host Controller. 'Auto' uses default value: for a Root port it is 100ms, for
a Hub port the delay is taken from Hub descriptor.
F81865 Super IO Configuration
Advanced
Main
F81865 Super IO Configuration
F81865 Super IO Chip
► Serial Port 0 Configuration
► Serial Port 1 Configuration
► Serial Port 2 Configuration
► Serial Port 3 Configuration

Power Failure

Serial Port Configuration

Set Parameters of serial ports. User can Enable/Disable the serial port
and select an optimal settings for the Super IO Device.
Power Failure
Options are:
Keep last state
Bypass mode
Always on
Always off (default)
32
Aptio Setup Utility
Chipset Boot
F81865
Always off
MB960 User's Manual
Security Save & Exit
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit