Clips Menu For Mp3/Wma/Jpeg; Still Mode; Screen Messages; Black Level - Samsung DVD-P182 User Manual

Note
To make the Setup menu disappear or return to
menu screen during set up, press RETURN button.
• The subwoofer test output signal is lower
than the other speakers.
• The MPEG Multichannel logo is a trademark
registered by PHILIPS Corporation.
• If you set Front (L, R) "Small", LFE
(Subwoofer) is set "On" automatically.
Setting Up the Display
Options
Display options enable you to set various video
functions of the player.
1. With the unit in Stop mode, press the MENU button.
2. Press the �/� buttons to select Setup, then press the �
or ENTER button.
3. Press the �/� buttons to select Display Setup, then press
the � or ENTER button.
4. Press the �/� buttons to select the desired item, then
press the � or ENTER button.
TV Aspect
❶
Depending on a type of television you have, you
may want to adjust the screen setting (aspect
ratio).
- 4:3 Letter Box : Select when you want to see
the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3
ratio screen. Black bars will appear at the top
and bottom of the screen.
- 4:3 Pan&Scan : Select this for conventional
size TVs when you want to see the central por-
tion of the 16:9 screen. (Extreme left and right
side of movie picture will be cut off.)
- 16:9 Wide : You can view the full 16:9
picture on your wide screen TV.

❷ Still Mode

❸
❹
❺
Language Setup
�
Audio Setup
�
Display Setup
�
Parental Setup :
�
DivX(R) Registration
�
Enter Return Menu
➏
DISPLAY SETUP
TV Aspect
Letter Box
Still mode
Pan&Scan
Screen Messa

Black Level

: Off
TV System : PAL
Video Output : I-SCAN
Return Menu
Enter
These options will help prevent picture shake in
still mode and display small text clearer.
- Auto : When selecting Auto, Field/Frame mode
will be automatically converted.
- Field : Select this feature when the screen
shakes in the Auto mode.
- Frame : Select this feature when you want to
see small letters more clearly in the Auto mode

Screen Messages

Use to turn on-screen messages On or Off.
Black Level
Adjusts the brightness of the screen.(On or Off) It
does not function in Progressive mode
TV System
- NTSC : In case of using NTSC disc
• If your TV system only has PAL-Video input,
you must choose "PAL". When you choose
"PAL", Interlace output format is PAL 60 Hz out-
put.
• If your TV system only has NTSC, input you
must choose "NTSC ".
- PAL : In case of using PAL disc
• If your TV system only has NTSC-Video input,
you must choose "NTSC".
• If your TV system only has PAL input, you must
choose "PAL ".
• If you set up the PAL TV system.
Video Output
Select Video Output.
- I-SCAN: Select when you want to use
Component Interlace (525i) Out.
- P-SCAN: Select when you want to use
Component Progressive (525p) Out.
• If you press the VIDEO SEL. button, Video
output mode is changed in regular sequence
in no disc mode. (I-SCAN ➝ P-SCAN).
• If the Yes/No selection in the Display Setup
sub Menu is not made within 10 seconds,
the screen returns to the previous menu.
.
.
Still mode
DISPLAY SETUP
TV Aspect : 4:3 L-Box
Still mode : Auto
Screen Messages : On
Black Level : Off
TV System
Video Output
Return Menu
Enter
27