Connection To An Audio System (2 Channel Amplifier) - Samsung DVD-P182 User Manual

Connection to an Audio System (2 Channel Amplifier)

1
Using the audio cables, connect the AUDIO (red and
white) OUT terminals of 5.1 CH (Front L-R) on the rear of
the DVD player to the AUDIO (red and white) IN termi-
nals of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO,COM-
PONENT OUT terminals on the rear of the DVD player to
the VIDEO, COMPONENT IN terminal of your TV.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select exter-
nal input in order to hear sound from the DVD player.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 27)
- The position of terminals can vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
12
RED WHITE
Audio Cable
RED WHITE
(See page 25-27)