Targus Ergo D-Pro User Manual page 12

Targus Ergo D-PRO™ Desktop Stand for Notebook
Toshiba Advanced port replicator ll and lll: Line up the
top of your port replicator with the indication lines on the
PRM at (F).
Port Replicator Module (PRM)
Once the position of the docking station/ port replicator has
been determined, you are now ready to secure your
docking station/ port replicator to the PRM.
If you decide to use the screw rivets, you will need to insert
the rivet anchors through the pass through holes (G), from
the rear of the PRM and into the bottom of your docking
station/ port replicator. After this is accomplished you are
free to insert and tighten the fastening screws. Once this is
complete the PRM is ready to mount to the laptop stand via
the tightening knobs illustrated on page 11.
G
12
D
E
F