Table of Contents
Advertisement
Airing Your Room
Remote Control
Control Panel
0
E-
DB98-22420A-1.indd
10
If the atmosphere in your room is stale, you can air it using the Fan
feature and if necessary, evacuate the stale air outside.
If you wish to evacuate stale air outside, push the ventilation lever on the
front of the unit to the right and the open position (
Result:
The air inside the room circulates and stale air is evacuated
outside.
Otherwise, push the ventilation lever to the left and the closed
position (
).
Result:
The air simply circulates inside the room.
If necessary, press the
Result:
The operating mode indicator (COOL,FAN or HEAT) on the
unit comes on.
The air conditioner starts up in the mode selected when the
unit was last used.
The unit beeps twice.
3
If the FAN indicator is not lit up on the unit:
Press the
button on the remote control
or
Press the MODE button on the unit one or more times until the FAN
indicator lights up
Result:
The unit beeps each time you press MODE.
The air conditioner starts up in Fan mode.
You can change modes at any time.
When the air conditioner is in Fan mode, the temperature is not
displayed; in this case, you do not need to set the temperature.
4
To set the fan speed to...
High
Med
Low
Result:
Each time you press a button, the unit beeps.
5
To control the direction of the air flow, refer to page .
).
(On/Off) button.
Then...
Press the
button on the remote control.
or
Press the
on the unit until the
indicator lights up
Press the
button on the remote control.
or
Press the
on the unit until the
indicator lights up
Press the
button on the remote control.
or
Press the
on the unit until the
indicator lights up
2006-5-31
16:31:31
Advertisement
Table of Contents
