Channel Add/Delete - Samsung CS 2Z45 Owner's Instructions Manual

Input - Source List
(depending on the model)
You can switch between viewing
TV
signal from connected equipment, TV
AV1
such as a VCR, DVD, set-top box,
AV2
and the TV source (broadcast or
Component
cable).
➢
You can change the required
Move
external source simply by
pressing the SOURCE button
on the remote control. It might take a short period of time
for pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
Channel - Auto Store
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers
manually and clear any channels you do not wish to watch.
Channels are sorted and stored
in the order which reflects their P 1
position in the frequency range
(with lowest first and highest
last). The programme originally
Enter
selected is then displayed.
➢
To stop the search before it has finished, press the ENTER
button.
When finished, the Sort menu is displayed. To sort the stored
channels into the desired numerical order, refer to "Channel -
Sort" on page 4.
To exit without sorting, press the EXIT button.
Channel - Sort
This operation allows you to
Source List
change the programme numbers
of stored channels.
This operation may be necessary
after using auto store.
Enter Return
 From : C hannel number to be
changed.
 To : New channel number to be identified.
 Store : Confirmation the exchange of channel numbers.
Channel - Manual Store
You can store channels, including
those received via cable networks.
When storing channels manually,
you can choose:
– Whether or not to store each of
the channels found
– The programme number of
each stored channel which you
Search
wish to identify
102MHz
7 %
 Programme (Programme number to be assigned to a
Stop
channel)
 Colour System : A UTO / PAL / SECAM / NTSC4.43 /
Return
 Sound System : BG / DK / I / M
 Search (When you do not know the channel numbers)
The tuner scans the frequency range until the first channel
or the channel that you selected is received on the screen.
 Store (When you store the channel and associated
programme number)
➢
If there is no sound or abnormal sound, re-select the
sound standard required.
Sort
TV
From : P 1
To : P--
Store : ?
Move Adjust Return
Manual Store
TV
Programme : P 3
Colour System : AUTO
►
Sound System : BG
►
Search : 46MHz
Store : ?
Move Adjust Return
NTSC3.58
English - 4
Channel - Add/Delete
You can exclude channels you
TV
▲ More
have chosen from the channels
P 1 : Added
you scanned. When you scan
P 2 : Added
through the stored channels,
P 3 : Added
P 4 : Added
those you have chosen to skip are
P 5 : Added
not displayed. All of the channels
▼ More
that you did not specifically
Move
choose to skip are displayed
during scanning.
Method:
ENTER : Select Added or Deleted
Channel - Fine Tune
If the reception is clear, you do
not have to fine-tune the channel,
P 1
as this is done automatically
during the search and store
operation. If however the signal is
Move
Adjust
weak or distorted, you may have
to fine-tune the channel manually.
Method:
◄/► : You can obtain a sharp and clear picture and good
sound quality.
▲/▼  ENTER : You can reset the setting.
MENU : You can memorise adjusted picture or sound.
Add/Delete
Enter Return
Fine Tune
0
Reset
Save
Return