Picture Mode - Samsung CS 2Z45 Owner's Instructions Manual

Picture - Mode
TV
 Mode : Dynamic / Standard
Mode
/ Movie / Custom
Contrast
You can select the type
Brightness :
Sharpness
of picture which best
Colour
Tint
corresponds to your viewing
Colour Tone : Cool1
requirements.
Reset
➢
Move
You can select these
options simply by
pressing the P.MODE button on the remote control.
 Contrast / Brightness / Sharpness / Colour /
Tint (NTSC only)
The television has several settings which allow you to
control the picture quality.
 Colour Tone : Cool2 / Cool / Normal / Warm / Warm2
 Reset
You can return to the factory defaults.
The reset function is set for each mode
(Dynamic, Standard, Movie, or Custom).
Picture - Digital NR / DNIe Jr
(depending on the model)
Mode
: Dynamic
►
: 100
 Digital NR
50
: 75 If the signal received by the
: 50
television is weak, you can
: G 50 R 50
► activate this feature to reduce
►
any static and ghosting that
Adjust Return
may appear on the screen.
 DNIe Jr
This feature bring you more detailed image with detail
enhancement, contrast enhancement and white
enhancement. New image compensation algorithm gives
brighter, clearer, much detailed image to you.
DNIe Jr technology will fit every signals into your eyes.
Picture
TV
Mode : Dynamic ►
Digital NR : Off ►
DNIe Jr : Off ►
Move Enter Exit
English - 
Sound -
(depending on the model)
Mode / Adjust / Auto Volume / Turbo Sound
 Mode : Standard / Music /
TV
Movie / Speech / Custom Mode
Adjust
You can select the type of
Auto Volume
special sound effect to be
Turbo Sound
used when watching a given
broadcast.
➢
You can select these
Move
options simply by
pressing the S.MODE button on the remote control.
 Adjust : Bass / Treble / Balance
The television has several settings which allow you to
control the sound quality.
➢
If you make any changes to these settings, the sound
mode is automatically switched to Custom.
 Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
 Turbo Sound
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie, or other channels.
➢
You can change the options simply by pressing the
TURBO button on the remote control.
Sound
: Standard ►
►
: Off ►
: Off ►
Enter Exit