Advertisement
3. ASSEMBLING INSTRUCTIONS
USING SPEAKERS WHEN ATTACHED TO THE PLASMA DISPLAY
1
ATTACHING VIBRATION ABSORBENT SPONGES TO SPEAKERS
.
Clean the surface with soft, lint-free cloth
where sponges will be attached.
2
INSTALLING FIXED BRACKETS TO SPEAKERS
.
Install fixed brackets to speakers before
attaching speakers to plasma display.
.
Attach the sponge to the side of the
speaker that will be attached to the
plasma display.
Fixed brackets
Sponge-attached side
5
5mm
Note
(0.2 inch)
Please leave a 5 mm space on the top
and bottom when attaching. Do not
cover the entire side with the sponge
as shown in the picture above.
5mm
(0.2 inch)
Note
Please make sure which side the fixed
brackets will be screwed to,
considering the left and right side of
speakers as shown in the picture to
the left.
Advertisement
