Asus MAXIMUS III EXTREME User Manual page 68

2. Marvell
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
•
•
•
3. JMicron
This connector connects to a Serial ATA hard disk drive or optical disc drive via
a Serial ATA signal cable.
2-38
Serial ATA 6.0 Gb/s connectors (7-pin SATA_6G_1/2 [red])
®
These connectors are set to Standard IDE mode by default. In Standard
IDE mode, you can connect Serial ATA data hard disk drives to these
connectors.
You must install Windows
Serial ATA hard disk drives.
When using hot-plug and NCQ, set the Marvell Controller item in the BIOS
to [AHCI Mode]. Refer to section 3.5.3 Onboard Devices Configuration for
details.
JMB363 Serial ATA connector (7-pin SATA_E1)
®
XP Service Pack 2 or later versions before using
®
Chapter 2: Hardware information