Electric Installation - Nexus Compass 35 Installation And Operation Manual

2 Electric installation

The transducer is connected to the Nexus Server if one is installed. If you do not have a
Nexus Server the transducer is connected direct to the Nexus Compass Data
instrument or Nexus Autopilot Servo Unit. After the electric installation you should
check the readings on the instrument before you proceed with the automatic
compensation. If the readings are inaccurate with more than 20º at any course, the
transducer should be moved.
Connection to a NX2 Server:
NX2 Server
Connection to a Nexus Server:
Nexus Server
Connection to a Compass Data instrument:
Green
Screen
Black
Red
3A Fuse
Compass Data instrument
Screen
White
Yellow
Green
Green
Yellow
White
Screen
Yellow
White
4
COMPASS 35º
Compass transducer
Compass transducer
Compass transducer