For Normal Material; For Stretch Material; Blind Stitch Hemmi Ng - White 1066 Instruction Manual

17. BLIND STITCH HEMMI NG
V
(Al For Normal Material
1. Moving the special
stitch control lever fully over to the left
against BS. (Fig. 19)
2. Moving the zigzag width knob at '0'.
V
3. Loosen
presser
foot thumb screw and
attach blind hem
guide. (Fig. 20)
6. Fold matarial as shown (Fig. 211 and place it under foot.
5. Sewing
carefully so that straight stitches are
made on hem
edge, and slantina stitches pierce only one or two threads of
fold. (Fig. 22)
55
M SB
Fig 19
Fig 20
Fig 21
(B)
For Stretch Material
The same manner as above except the zigzag width knob must
be moved to between '1' and '2'.
You may have to vary the setting according to the material.
FFi 22
—15--