Framing And Clearances; Selecting Appliance Location - Heat & Glo CRESCENT II CRESCENT II Owner's Manual

3 3

Framing and Clearances

Note:
• Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
A. Selecting Appliance Location
When selecting a location for your appliance it is important to
consider the required clearances to walls (see fi gure 3.1).
D
Figure 3.1 Appliance Locations
8
In addition to these framing dimensions, also reference the following sections:
• Clearances and Mantel Projections (Sections 3.C and 3.D)
• Vent Clearances and Framing (Section 6).
A
Inches 24-5/8
Millimeters 625
Heat & Glo • Crescent II • 2083-902 Rev. N • 7/09
Fire Risk
Provide adequate clearance:
• Around air openings
• To combustibles
• For service access
Locate appliance away from traffi c areas.
NOTE: For actual appliance dimensions refer to Sec-
tion 16.
B
B C D
23-1/2 34-7/8 15-1/8
597 886 384
WARNING
C
A