Heat & Glo CRESCENT II Owner's Manual page 32

Inside Fit Surround
The inside fi t surround design is used with fi nishing
materials greater than 3/4 inch for non-combustible
fi nishing. The surround is designed to set back on fi nishing
materials (see Figure 11.5).
Figure 11.5 Inside Fit Surround
To cut the arch use the dimensions shown in Figure 11.6.
30-13/16 IN.
23-5/8 IN.
Figure 11.6 Inside Facing Dimensions
32 Heat & Glo • Crescent II • 2083-902 Rev. L • 7/08