Strategy For Replacing Frus For Cto, Cmv, And Gav; Product Definition; Fru Identification For Cto, Cmv, And Gav Products; Follow The Instructions On The Screen - Lenovo ThinkPad X230 Tablet Manual

Strategy for replacing FRUs for CTO, CMV, and GAV

Product definition

Dynamic Configure To Order (CTO)
This provides the ability for a customer to configure a Lenovo solution from an eSite, and have this
configuration sent to fulfillment, where it is built and shipped directly to the customer. The machine label and
eSupport will load these products as the 4-digit MT and 3-digit model, where model = "CTO" (Example:
1829-CTO).
Custom Model Variant (CMV)
This is a unique configuration that has been negotiated between Lenovo and the customer. A unique 4-digit
MT and 3-digit model is provided to the customer to place orders (Example: 1829-W15). A CMV is a special
bid offering. Therefore, it is NOT generally announced.
• The MTM portion of the machine label is the 4-digit MT and 3-digit model, where model = "CTO"
(Example: 1829-CTO). The PRODUCT ID portion of the machine label is the 4-digit MT and 3-digit CMV
model (Example: 1829-W15).
• eSupport will show both the CTO and CMV machine type models (Example: 1829-CTO and 1829-W15
will be found on the eSupport site.)
General Announce Variant (GAV)
This is a standard model (fixed configuration). GAVs are announced and offered to all customers. The MTM
portion of the machine label is a 4-digit MT and 3-digit model, where model = a "fixed part number", not
"CTO" (Example: 1829-F1U). Also, eSupport will list these products under the same fixed model number.

FRU identification for CTO, CMV, and GAV products

Use Lenovo eSupport to identify major FRUs, FRU part numbers, and FRU descriptions for CTO, CMV, and
GAV products at an MT - serial number level. Examples of major FRUs are hard disk drive, system board,
liquid crystal display (LCD), and memory module. All CTO and CMV products are loaded under the 4-digit
MT and 3-digit model, where model = "CTO" (example: 1829-CTO). GAVs are loaded under the 4-digit MT
and 3-digit model, where model = a "fixed part number", not "CTO" (example: 1829-F1U).
To identify the major FRUs for a product, do the following:
1. Go to:
http://www.lenovo.com/support
2. Click Warranty & Services.
3. Click Check Warranty Status.
4. On the Warranty Status Lookup page, click Parts Lookup.
5. Type your machine type and serial number, and then click Submit.
eSupport also can be used to view the general FRU list for a product.
To get the general FRU list for a product, do the following:
1. Go to:
http://www.lenovo.com/support
2. Click Parts & Accessories.
3. Follow the instructions on the screen to select product.
.
Chapter 2 Important service information
19