2050 Hinge
For access, remove these FRUs in order:
•
"1020 Battery pack" on page 63
•
"1050 Hinge cap" on page 67
•
"1060 Keyboard" on page 67
•
"1070 Palm rest" on page 70
•
"1120 Keyboard bezel" on page 80
•
"1130 LCD unit" on page 83
•
"2010 Button bezel and fingerprint reader" on page 93
•
"2020 LED board" on page 95
Removal steps of hinge
Step
Screw (quantity)
1
M2.5 × 6 mm, wafer-head, nylon-coated (2)
Detach the hinge from the LCD rear cover, and gently pull the cables out through the guide hole in the hinge.
Pull the cables all at once. As you pull the cables, be sure not to subject the cables to any tension, which
could cause the cables to be damaged by the cable guides, or a wire to be broken.
Torque
Color
Black
0.392 Nm
(4 kgf-cm)
.
Chapter 9
Removing or replacing a FRU
103