Control Panel Operations (PC Print Mode)
Canceling a Print Job
You can cancel a print job from the control panel of the machine. You can
cancel a print job from the control panel only while the machine is in PC
print mode.
1
Make sure the machine's display
shows "*PC PRINT* PRINTING".
2
Hold down the [Stop] key for five
seconds, until the "PC JOB
CANCEL?" confirmation message
appears on the display.
3
Press the [Yes] key to cancel the
print job or the [No] key to resume
printing.
Note
You can use steps 2 and 3 of the above procedure to cancel a print job
while any of the following errors is indicated on the display: PAPER
EMPTY, INCORRECT PAPER SIZE, NO SUITABLE PAPER, PAPER
SIZE ERROR, LOAD PAPER, PAPER JAM, COVER OPEN, TONER
EMPTY, MEDIA TYPE ERROR.
A print job cannot be canceled while print data is being received by the
machine.
5
5-5