Recovering From A Power Interruption - Kodak D4000 User Giude

Troubleshooting

Recovering from a Power Interruption

4-8
CAUTION:
If the printer loses power while printing, the printer stops
with the thermal print heads positioned against the platen
rollers. The platen rollers could become damaged if the thermal
print heads are left in this position.
If a power outage occurs:
1. Unlock and open the front door.
2. Rotate the thermal head release levers (labelled L1 and R1) down
to the unlocked position.
3. When power is restored:
a. Rotate the thermal head release levers (labelled L1 and R1)
up to the locked position. Place both of your hands on each
lever and rotate it slowly.
NOTE: Rotating the levers after a power interruption requires
more force than rotating the levers during normal operation.
b. Power cycle the printer.
c. Send your print job again.