Kodak D4000 User Giude page 14

Setting Up the Printer
1-10
d. Remove the paper band from the ribbon.
e. Push the end of the take-up spool against the spring-loaded
spool holder. Insert the other end of the take-up spool through
the hole in the cassette frame.
Slack in the ribbon can cause a paper jam.
IMPORTANT:
f. Remove any slack in the ribbon by turning the supply spool.
12. Insert each cassette until it clicks into place.
13. Rotate the thermal head release lever on the left side (labelled
L1) and/or the right side (labelled R1) up to the locked position.
14. Close the front door.