Recovering From A Power Interruption - Kodak D4600 User Manual

Recovering from a Power Interruption

November 2014
CAUTION:
If the printer loses power while printing, the printer stops
with the thermal print head is positioned against the platen
roller. The platen roller could become damaged if the
thermal print head is left in this position.
If a power outage occurs:
1. Move the power switch to the On ( | ) position.
2. Remove the exit tray from the front of the printer.
3. Open the front of the printer.
• Press the release button.
• Pull the front of the printer forward until it stops.
4. Open the top door of the printer.
5. When power is restored:
a. Power cycle the printer.
b. Follow the procedure for
page 5-4.
c. Send the print job again.
Troubleshooting
"Clearing a Paper Jam" on
5-15