Table of Contents
Advertisement
6 Status window. It shows Date and Time. Further it displays "connection established" and a circular fan
on the left bottom is rotating when connection button is activated, or "Waiting for connection" when
disconnection button is activated.
7 Set button. 3 different set buttons
a) Setting : It is in the middle of 3 buttons. Press this button to input IP Address and others and to set
circular monitoring interval and scan rate, as following dialog box.
- Input IP Address you already input into DVR unit(TCP/IP SETUP) in IP ADDRESS.
- Input Port number you already input into DVR unit in PORT. Just input 80, which is
default port number.
- Input "ADMIN" in ID.
- Input the same password you set into DVR unit in PASSWORD.
Default password of DVR unit is "44444".
User need to input ID and PASSWORD.
- PT TYPE: This function is not available.
- Select circular monitoring interval ranging from 0.1 sec to 10 sec. The smaller it is, the faster picture
of each channel rotates. The absolute circulation interval is a little different from set value depending
on data transfer rate of IP network.
- Select scan rate ranging from 1x to 64x. The larger it is, the faster search speed is.
The absolute search speed is a little different from set value depending on data transfer rate of IP
network.
b) Scan. : Press scan button to enter into search window. Using various operation buttons, you can
search recorded pictures, save selected pictures on client PC, or print pictures. Refer to
following paragraph "3. Search recorded pictures over IP network" for details.
c) Rotate : Press rotate button to see live pictures from channel 1 to 4 in rotation. Screen division must
be set at 1 to see live pictures one after another in rotation. Speed of rotation shall be as per
settings of circular monitoring interval.
44
Advertisement
Table of Contents
