> MOTION AREA SETUP <
****CH01 AREA MASK****
: WALK ON MODE
1.2.3.4: SELECT CHANNEL
ENTER: MASK OFF
ESC KEY: QUIT
WALK ON MODE: Set up single sections one by one mode on(SELECT).
WALK OFF MODE: Set up single sections one by one mode off(CLEAR).
BLOCK ON MODE: Select by BLOCK area mode on(SELECT).
BLOCK OFF MODE: Select by BLOCK area mode off(CLEAR).
ALL ON MODE: Select all area mode on(SELECT).
ALL OFF MODE: Select all area mode off(CLEAR).
WALK ON MODE
BLOCK ON MODE
ALL ON MODE
:MOVE SURSOR
WALK OFF MODE. Press ENTER to clear or select each sections.
BLOCK OFF MODE. Press ENTER to clear or select sections by block.
ALL OFF MODE Press ENTER to clear or select all sections.
Press
numeric to select channel.
Press
value change button to change mode.
Press direction button to move sursor.
Press ENTER button to on mask function or off.
Press ESC button to quit.
28