Table of Contents
Advertisement
The Rear Panel at a Glance
1 Power-line voltage setting
2 Power-line fuse-holder assembly
3 AC inlet
Use the front-panel
I/O Config
•
Select the GPIB or RS-232 interface (see chapter 3).
•
Set the GPIB bus address (see chapter 3).
•
Set the RS-232 baud rate and parity (see chapter 3).
6
4 Power-line module
5 GPIB (IEEE-488) interface connector
6 RS-232 interface connector
key to:
Advertisement
Table of Contents
