The Cwmp Setup Screen - ZyXEL Communications AMG1001-T Series User Manual

Chapter 19 CWMP

19.2 The CWMP Setup Screen

Use this screen to configure your AMG1001-T/AMG1011-T to be managed by a management server.
Click Access Management > CWMP to display the following screen.
Figure 69 Access Management > CWMP
The following table describes the fields in this screen.
Table 40 Access Management > CWMP
LINK
CWMP Setup
CWMP
Login ACS
URL
User Name
Password
Connection
Request
Path
108
DESCRIPTION
Select Activated to allow the AMG1001-T/AMG1011-T to be managed by a management
server or select Deactivated to not allow the AMG1001-T/AMG1011-T to be managed by a
management server.
Configure this part of the screen to log into the management server.
Type the IP address or domain name of the management server. If the AMG1001-T/
AMG1011-T is behind a NAT router that assigns it a private IP address, you will have to
configure a NAT port forwarding rule on the NAT router.
The user name is used to authenticate the AMG1001-T/AMG1011-T when making a
connection to the management server. This user name on the management server and the
AMG1001-T/AMG1011-T must be the same. Type a user name of up to 255 printable
characters found on an English-language keyboard. Spaces and characters such as
@#$%^&*()_+ are allowed.
The password is used to authenticate the AMG1001-T/AMG1011-T when making a
connection to the management server. This password on the management server and the
AMG1001-T/AMG1011-T must be the same. Type a password of up to 255 printable
characters found on an English-language keyboard.
Use this part of the screen to allow the management server to connect to the AMG1001-T/
AMG1011-T after a successful login.
Type the IP address or domain name of the AMG1001-T/AMG1011-T. The management
server uses this path to verify the AMG1001-T/AMG1011-T.
AMG1001-T/AMG1011-T Series User's Guide