Problems; Driver Signing Options Setting; (Windows Xp); Power Management Settings - Roland A-88 Owner's Manual

Troubleshooting
Changing Computer Settings to Avoid Problems
Changing these computer settings can help you avoid the problems described in "Problems When
Installing the Driver" (p. 48) and "Problems When Using the Unit" (p. 49).
Driver Signing Options Setting (Windows XP)
If the "Driver Signing Options" setting is set to [Block], you cannot install the driver. Configure as
follows.
1.
Open the "Control Panel," click [Performance and Maintenance], and then click the
[System] icon .
If you have selected Classic view, double-click [System].
2.
Click the [Hardware] tab, and then click [Driver Signing] .
The "Driver Signing Options" dialog box will open.
3.
In the "Driver Signing Options" dialog box, select [Warn] or [Ignore], and then click
[OK] .
4.
Click [OK] to close the "System Properties" dialog box .
5.
Install the driver as described in "Driver Installation" (p . 17) .
When you have completed the installation, return the "Driver Signing Options" setting to its
original setting.

Power Management Settings

If the sound is interrupted during a performance or if sounds are missing, you may be able to
resolve the problem by changing the computer's power management settings.
Windows 8/Windows 7/Windows Vista
1.
Open the "Control Panel," click [System and Security] or [System and Maintenance],
and then click [Power Options] .
• If you have selected Icon view in Windows 8 or Windows 7, double-click the [Power Options]
icon.
• If you have selected Classic view in Windows Vista, double-click the [Power Options] icon.
2.
When "Select a power plan" appears, select [High performance] .
3.
Click [Change plan settings] next to [High performance] .
If "High performance" is not displayed in Windows 8 or Windows 7, click [Show additional plans].
52