Screen Saver - ADT Pulse Touch Screen User Manual

ADT Pulse SM Interactive Solutions Touch Screen User Guide

Screen Saver

The Screen Saver feature allows you to automatically play one or more widgets or other touch screen
features when the touch screen is not in use.
When the Screen Saver feature is about to start, a count-down timer appears at the top of the screen above
the time, indicating how much time is left before the Screen Saver starts.
A similar count-down timer indicates how much time is left before the next widget starts playing, if you
select more than one widget for the Screen Saver feature.
The Screen Saver behaves like a computer screen saver, but the widgets playing are "live". For example, if
you select a camera as one of your Screen Saver widgets, that camera plays live video.
In addition, you can interact with the Screen Saver widgets while they are playing in the Screen Saver
feature. For example, if you select Traffic as one of your Screen Saver widgets, you can touch the screen
while the Traffic widget is playing to display the traffic controls, select a new location, and view the traffic in
that location.
When you stop touching the screen to interact with a Screen Saver widget, after the specified idle period,
the Screen Saver continues playing where it left off. So, for example, if your Screen Saver list includes
Photos, Traffic, and Camera (in that order) for two minutes each, and you interact with the Traffic widget
while it is playing, the Screen Saver feature is suspended. When you stop interacting with the touch
screen, the Screen Saver starts playing the Traffic widget again for the full specified period of time (in this
example, two minutes) and then continues by playing the Cameras widget next, and so on.
When you touch Screen Saver, the Screen Saver screen appears.
On this screen, you can:
Touch Screen Saver List to select the widgets to play when Screen Saver starts.
Touch Start Screen Saver After to specify when you want Screen Saver to start.
Page 62