ADT Pulse Touch Screen User Manual page 24

ADT Pulse SM Interactive Solutions Touch Screen User Guide
Subdisarming Security Panel
Note: This feature is not available for all security panels. Instead, with these security panels, you
bypass certain sensors after you disarm the system. To do so, see
If you have 24-hour protection sensors on certain special items, such as a medicine cabinet or a wall safe,
those sensors remain armed, even when the rest of the system is disarmed. When you configure the
system that way, disarming the system disarms everything except those special items. To access those
special items, you must subdisarm the system. Subdisarming disarms the 24-hour protection sensors as
well as all other sensors.
Note:
Environmental sensors, such as smoke and freeze sensors, remain active at all times.
To subdisarm the system (that is, to gain access to your special items without setting off an alarm), touch
Subdisarm Security Panel on the Security screen, and then enter the master code to subdisarm the
system.
Note: The security system must be disarmed before you can subdisarm it. You cannot subdisarm
from an armed state.
When the system is subdisarmed, the text to the left of the system icon displays "Subdisarmed".
To reverse the subdisarm (that is, to re-arm the special items but leave the rest of the system disarmed),
return to the Home screen and touch DISARM. No access code is required to disarm the system in this
situation. The security system returns to the disarmed state.
Page 17
"Sensors" on page 14.