Table of Contents
Advertisement
9 9
Fireplace Setup
A. Clean the Fireplace
Clean/vacuum any sawdust that may have accumulated in-
side the fi rebox or underneath in the control cavity.
B. Grate Assembly Placement
Back Legs in Grate Brackets
Back Legs in Grate Brackets
Figure 9.1
Back Legs in Grate Brackets (front view)
Ensure grate assembly is over burner assembly, centered from left to right, and back legs are in grate brackets.
C. Positioning the Logs
Figure 9.3
Right Rear Log (SRV720) (front view)
Place right rear log on the grate against the fi replace right side wall, so that its right end sits in the bracket opening.
Figure 9.5
Left Rear Log (SRV728) (front view)
Place the left rear log on the grate against the left wall and rest it on log.
See Section 13.B. for log descriptions and illustrations.
Heat & Glo Lifestyle Collection • Dakota 42-CE • 4036-915 Rev I • 11/07
Note: Use only manufacturer's supplied media for fuel
bed layout.
Figure 9.2
Top view
Figure 9.4
Top view
Figure 9.6
Top view
13
Advertisement
Table of Contents
