Heatilator Wood Burning Fireplace A36CH Owner's Manual page 34

• TS345/TS345P Square Termination Cap
Termination Cap
Collar
2 in. (51 mm)
Minimum Height
Chase Top
Chimney
Pipe
Termination cap pipe and chimney section must overlap 1-1/2 in. (38 mm).
Figure 9.7 Installing a TS345/TS345P Square Termination Cap
• TCT375 Terra Cotta Cap
Termination Cap
Collar
2 in. (51 mm)
Minimum Height
Chase Top
Chimney
Pipe
Termination cap pipe and chimney section must overlap 1-1/2 in. (38 mm)
Figure 9.8 Installing a TCT375 Terra Cotta Cap
34
Place waterproof
sealer under each
flange of the termina-
tion cap and on top of
each screw to help
prevent leaks.
3 in. (76 mm)
Maximum
top of chase to
top of
chimney section
Chase
Place waterproof
sealer under each
flange of the termina-
tion cap and on top of
each screw to help
prevent leaks.
The last section of pipe
must stop between 2 in.
(51 mm) above top of
chase and 7 in. (178
mm) below top of chase
2 in. (51 mm)
7 in. (178 mm)
Chase
Heatilator • A36C & A42C • 28396 • Rev AG • 11/08
• • European Copper Series Termination Cap European Copper Series Termination Cap
Cap top comes assembled in place.
Cap Top
(Be sure holes
in cap top and
cap base are
aligned.)
Cap Base
bracket (8)*
screw (8)*
chase
top
(metal or masonry)
CT-3A
Adapter
SL pipe
Figure 9.9 Installing an Adapter for European Copper Cap Se-
ries (CT-King shown)
brass screw (8)
(9 for the King-Style)
bolt (8)*
nut (8)*
washer (8)*
2 in. (51 mm)
typical collar height
14-1/2 in.
(368 mm)