Heatilator Vented Gas Fireplace NBV3630 Owner's Manual page 28

M. Install Floor Cover
Install the fl oor cover as shown in Figure 12.10.
Figure 12.10 Installing Floor Cover
Note: The fl oor cover in the bottom front of the fi replace
may be covering the UL labels. It is loose and can be
removed/replaced.
N. Fixed Glass Assembly
Removing Fixed Glass Assembly
WARNING! Risk of Asphyxiation! Handle fi xed glass as-
sembly with care. Inspect the gasket to ensure it is undam-
aged and inspect the glass for cracks, chips or scratches.
DO NOT:
• Strike, slam or scratch glass
• Operate fi replace with glass removed, cracked, bro-
ken or scratched.
Replace fi xed glass assembly as a complete assembly.
• Remove screen.
• Pull the four (30/33/36 in. appliances) or seven (42 in.
appliance) glass assembly latches out of the groove on
the glass frame. Refer to Figure 12.11.
• Remove the glass assembly from the appliance.
Latches
(both bottom
and top)
Glass
Assembly
Figure 12.11 Glass Assembly
28 Heatilator • Novus NBV • 4055-188 Rev C • 04/08
Replacing Fixed Glass Assembly
• Set the glass panel on the lower two or four glass assembly
latches, ensuring the glass panel is centered in the
opening.
• Replace screen
O. Close the Screen Assembly
Rotate the screen closed. See Figures 12.12 and 12.13.
Figure 12.12 Closing Screen
Figure 12.13 Closing Screen