Declaration Of Conformity - Agilent Technologies N5700 Series User Manual

Manufacturer's Name:
Manufacturer's
Address:
Declares under sole responsibility that the product as originally delivered
Product Name:
Model Numbers:
Product Options:
complies with the essential requirements of the following applicable European Directives, and carries the CE
marking accordingly:
Low Voltage Directive (73/23/EEC, amended by 93/68/EEC)
EMC Directive (89/336/EEC, amended by 93/68/EEC)
and conforms with the following product standards:
EMC Standard
EN 61326 :1997+A1 :1998+A2 :2001
EN 55011:1998 & A1 :1999
IEC 61000-4-2:1995
IEC 61000-4-3:1995
IEC 61000-4-4:1995
IEC 61000-4-5:1995
IEC 61000-4-6:1996
IEC 61000-4-11:1993
Canada: ICES-001:1998
Australia/New Zealand: AS/NZS 2064.1
The product was tested in a typical configuration.
Safety IEC 61010-1:2001 / EN 61010-1:2001
Canada: CSA C22.2 No. 1010.1:1992
UL 61010B-1: 2003
Supplementary Information:
This DoC applies to above-listed products placed on the EU market after:
January 1, 2004
Date
For further information, please contact your local Agilent Technologies sales office, agent or distributor,
or Agilent Technologies Deutschland GmbH, Herrenberger Straße 130, D 71034 Böblingen, Germany.
According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014
Responsible Party
Agilent Technologies, Inc.
550 Clark Drive, Suite 101
Budd Lake, New Jersey 07828
USA
N5700 Series Power Supply
N5741A, N5742A, N5743A, N5744A, N5745A, N5746A, N5747A,
N5748A, N5749A, N5750A, N5751A, N5752A
N5761A, N5762A, N5763A, N5764A, N5765A, N57466A, N5767A,
N5748A, N5769A, N5770A, N5771A, N5772A N6700
This declaration covers all options of the above product(s)

DECLARATION OF CONFORMITY

Alternate Manufacturing Site
Lambda EMI
405 Essex Rd
Neptune, NJ, 07753-7701
USA
Limit
EMC requirements for electrical equipment
for measurement, control and laboratory use
Group 1 Class A
4 kV CD, 8 kV AD
3 V/m, 80-1000 MHz, 80% AM
0.5 kV signal lines, 1 kV power lines
0.5 kV differential, 1 kV common mode
3 Vrms, 0.15-80 MHz, 80% AM
100%/20 ms
Bill Darcy
Product regulations manager