Table of Contents
Advertisement
• The display of remaining time on the card available for recording
changes according to the selected RDAC-Mode.
• Next, if you're making the setting for "REC Type", proceed to step 2 of
the procedure for setting the recording type.
If You're Not Sure About Which Grade and Mode to Choose
The optimal grade and mode vary according to the usage conditions,
including the connected equipment, recording source, sound quality, time,
and playback system.
When a card is formatted, the RDAC-Grade is set to STANDARD and the
RDAC-Mode is set to MODE3.
First, try recording and playback with these settings. In most cases, this
yields satisfactory sound quality.
REC Type (STEREO or MONO)
Select either stereo recording or mono recording.
Choosing mono recording gives you recording times that are twice as long
as with stereo recording.
Procedure for Setting the Recording Type
1
Put the unit into recording standby.
2
Turn the SELECT dial to choose "REC Type," then press the
dial.
fig.09-g09e
3
Turn the SELECTdial to choose the REC Type (STEREO or
MONO), then press the ENTER button.
fig.09-g10e
* Pressing the PLAY button or the PAUSE button instead of the ENTER button
starts recording without locking in the setting.
* Please be aware that if you press the SELECT dial instead of the ENTER button, the
setting is not confirmed.
• The display of remaining time on the card available for recording
changes according to the selected recording settings.
Recording Audio
47
Advertisement
Table of Contents
