Cancelling Cooking In Progress; Changing The Cooking Temperature - Ariston Hotpoint Instructions For Use Manual

Table of Contents

Advertisement

Setting a cooking programme
with delayed start

Changing the cooking temperature

Press the
button.
Adjust by pressing the + and – buttons.
Save your selection by pressing the
Changing the cooking time
During cooking, you can adjust the cooking time by
pressing
and the + and - buttons.
Press START to start cooking.
Setting a cooking programme with delayed
start
Set the desired cooking mode, the time and adjust the
temperature if necessary,
Example: position Steam Cooking
Press the
button and select the cooking time using the
+ and - buttons, for example 30 min.
For example, it is 12:30.
You have programmed a 30-minute cooking cycle.
The displayed end of cooking time is 13:00.
Using the
buttons, select end of cooking and the
end of cooking time is displayed.
Adjust the end time using the + and - buttons.
Example 14:00
Confirm by pressing
"
"
to start the programme.
After these steps, oven heating is delayed so that cooking
ends at 14:00.
When the cooking cycle is finished, a series of beeps is
emitted for several minutes.
You can stop the beeps by pressing

Cancelling cooking in progress

You can stop the cooking at any time by pressing
approximately 1 second).
If steam generation has not yet begun (approximately one
"
"
button.
minute), the oven stops immediately and the time display
disappears.
If steam generation has already begun, the time changes to
3 minutes, a countdown begins and the steam escapes
before the door is opened
At the end of cooking
Temperature 85°C.
Water management
In the event of a water circuit-related problem during cooking, the
"no water" indicator appears, a beep is emitted and a "Fill your
water tank" message appears in the display.
After checking these two points, close the door and press
The oven restarts.
"
"
for one second.
.
You MUST empty the tank.
To ensure good oven reliability, the fan
continues to function for a short period after
cooking is complete.
This error is specifically associated with:
- an empty tank.
- a poorly seated tank.
EN
"
"
(for
"
".
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mska103x

Table of Contents