Roland V-Drums TDW-20 Owner's Manual page 48

About the Pad Patterns
Loop: Loop Pattern:
Tap: Tap Pattern:
1Shot: One-Shot Pattern: Playback (one time only) starts when
Remarks
*1: A Pattern is assigned (Loop, One-Shot, Tap).
* To stop a Loop pattern that is playing, either strike the pad
used to play the Loop pattern once again, or press the TD-
20's [STOP] button.
* To turn off all pad patterns assigned to a drum kit at one time,
set the PadPtn Master SW setting to OFF. This is on a "per-kit"
basis.
Procedure: Press [KIT] - [F2 (FUNC)] - [F4 (PAD PTN)], then set
PadPtn Master SW to "ALL PADS OFF."
*2: Brushes can be used.
*3: Parameters including volume etc. are set to standard values.
Use this when creating a kit from scratch.
48
Playback starts when the pad to which
the pattern is assigned is struck, and
stops when hit again.
Chords or melodies are played once
each time the pad to which the pattern
is assigned is struck.
the pad to which the pattern is assigned
is struck.