Roland V-Drums TDW-20 Owner's Manual page 11

Data Compatibility
• Data created on the original TD-20 and backups stored on a
CompactFlash card can be used with an expanded TD-20 (p.
40).
• The original TD-20's factory preset drum kits can be used with
an expanded TD-20.
• Data created with an expanded TD-20 is not compatible with
original TD-20.
• The TD-20 will not function if you remove the TDW-20 after
performing the update.
Caution when Handling the TDW-20
• Components of the TDW-20 can be damaged by static
electricity. Please observe the following precautions when
handling it.
• Before touching the TDW-20, you must touch some other
metal object to safely discharge any static electricity that
might be in your body or clothing.
• When holding the TDW-20, grasp the edges of the circuit
board and DO NOT touch the components on the circuit
board or the connectors.
• If you need to store or ship the TDW-20, place it in the
original bag (conductive bag for electrostatic protection).
• DO NOT touch the circuitry or connectors inside the TD-20.
• When inserting the TDW-20, do not force it into the slot. If
insertion is difficult, take the TDW-20 out and then try again.
Use the provided tool to lock it in place.
• When you've finished installing the TDW-20, double-check
your work.
• If a foreign object should get inside the TD-20, request
servicing by your retailer, the nearest Roland Service Center, or
an authorized Roland distributor, as listed on the "Information"
page.
11